Know Your Lamps: Overview

Welcome to the first in a series of posts looking at the many types of lighting instruments in use on film and TV sets today. This is not intended to be an exhaustive or comprehensive list, but it will give you a good idea of your options, particularly if you’re moving up from smaller productions – where lighting kit is mostly borrowed – to larger ones, where you’re required to submit a lighting list to a rental house.

Some of the key considerations when choosing a lamp are:

  • Colour temperature – how orange or blue the light appears – see this post for more info
  • CRI – Colour Rendering Index – how full a spectrum of light is emitted, and therefore how accurately colours are rendered
  • Light quality – how hard or soft the light is
  • Power consumption
  • Hire cost

Lamps can be divided into categories according to the means by which they produce light. Here is an overview of the main types.

 

Redheads draw 800W each

Incandescent (view detailed post)

Incandescent lamps work by passing electrical current through a wire filament which becomes so hot that it glows. In the film industry they are generally referred to as ‘tungsten‘ units after the metal which the filament is made from. Common tungsten lamps include Dedolites, 1K ‘babies’ and open-face 800W and 2KW units (which have misogynous nicknames I shall not repeat here).

Pros: cheap, dimmable, extremely high CRI

Cons: very inefficient, get very hot, colour temperature changes when dimmed

Colour temperature: 3,200K

Light quality: generally hard (although certain units like Space Lights are softer)

 

HMI fresnel

HMI (view detailed post)

The HMI (hydragyrum medium-arc iodide) is the most common form of high intensity discharge lamp used in the industry. It operates by creating an electrical arc between two electrodes which excites a gas. You may occasionally hear about an MSR (medium source rare-earth), which is slightly different technology, but as far as a cinematographer is concerned MSRs and HMIs are the same. They require a ballast to ignite the arc and regulate the current and voltage.

Pros: good CRI, good match for daylight, efficient

Cons: only dimmable down to 50%, expensive, heads and ballasts sometimes hum or ‘squeal’, older bulbs can vary in colour, flicker issues at certain shutter angles with magnetic ballasts

Colour temperature: 5,600K

Light quality: hard

 

Kino4x4Fluorescent (view detailed post)

Fluorescent lamps are found almost everywhere today, as strip lights in supermarkets and offices, and energy-saver bulbs in the home. Similar in principle to HMIs, electric current causes mercury vapour to emit UV light which is translated into the visible spectrum by the phosphor coating on the tube. Kino Flo pretty much has the monopoly on fluorescent lighting for the film industry. Like HMIs, fluorescents require a ballast.

Pros: reasonable CRI from Kino Flos (appalling CRI from domestic/commercial fixtures), very efficient, get warm but not hot

Cons: limited dimming, high fall-off of light

Colour temperature: 5,500K and 3,200K tubes available

Light quality: soft

 

LED copyLED (view detailed post)

Gradually replacing tungsten as the most common lamps found on no-budget shoots, LED (light emitting diode) units contain semi-conductors that emit light when their electrons reconfigure. The technology is advancing rapidly, but there is currently a wide range of LED lamps on the market, varying greatly in price and corresponding quality.

Pros: extremely efficient, barely get warm, can run off batteries, almost fully dimmable, some models have adjustable colour temperature

Cons: CRI ranges from almost acceptable in the expensive models to downright shocking in the cheaper ones

Colour temperature: varies

Light quality: varies

 

Though there are other types of lighting, like xenon, metal-halide and HEP (high efficiency plasma), the above four are the main ones you will encounter on film and TV sets today. Over the next few weeks I’ll look at each of those types in more detail, listing many of the specific units available in each category and their applications.

By the way, if your budget is too tight to hire film lamps of any kind, you may want to check out my post on lighting without movie lamps.

Know Your Lamps: Overview